Vimar Elvox 46235.030D Скачать руководство пользователя страница 5

Страница: 5 / 70

Graphic User Interface (GUI) for IP Speed Dome

1 Introduction

This Speed Dome IP-camera is designed for high performance CCTV solutions. Its digital flip technology makes omni-

directional and non-blind-spot monitoring into reality. It utilizes most advanced technologies, such as video encoding

and decoding technology, complies with theTCP/IP protocol, SoC (System on chip), etc to ensure this system more

stable and reliable.

Complete manuals and CVM CCTV Manager, Iptool e Diskcalculator software are available to download in the Product

info sheet section of www.vimar.com website.

Main characteristics:

- CMOS progressive scan

- HD network video output

- H.265/H.264 image compression format

- TCP/IP, DHCP, DDNS, NTP, RTSP, SMTP, FTP, PPPoE

- SD card local storage, network remote storage

- Web GUI menu

- Support selected area amplification and PTZ function

- lIntelligent Analytics: Line Crossing (human/vehicle classification), region intrusion/entrance/exiting (human/vehicle

classification), Target Counting, face detection, auto-tracking, etc. (For all these smart functions, depending on models).

2 IE Remote Access

You may connect IP-Cam via LAN or WAN. Here only take IE browser for example. The details are as follows:

2.1 LAN

In LAN, there are two ways to access IP-Cam:

1. access through IP-Tool;

2. directly access through IE browser.

2.1.1 Access through IP-Tool

Network connection:

1 - Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the PC from the CD.

2 - Double click the IP-Tool icon on the desktop to run this software as shown below:

3 - Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the information of the camera

listed in the above table to show the network information on the right hand. Modify the IP address and gateway of the

camera and make sure its network address is in the same local network segment as the computer’s. Please modify

the IP address of your device according to the practical situation.

Содержание Elvox 46235.030D







































































Результаты поиска

Содержание Elvox 46235.030D

Отзывы:

Vimar Elvox 46235.030D, Инструкция по установке и эксплуатации, Страница: 5 / 70

Результаты поиска

Содержание Elvox 46235.030D

Отзывы: