Vimar Elvox 46235.030D, Инструкция по установке и эксплуатации, Страница: 37 / 70

37
Graphic User Interface (GUI) for IP Speed Dome
EN
5.4.5 Smart Tracking
The tracking option is available for line crossing detection, region entrance and exiting and intrusion detection.
Smart Tracking : When people or vehicle cross the alarm line or intrude or exit the predefined area, the PTZ camera
will automatically track them and the target image will be automatically zoomed in and centered on the screen until the
target disappears on the screen. After that, the PTZ camera will return to the tracking start position.
Tracking Mode: PTZ Auto Tracking Priority or Manual PTZ Control Priority can be optional.
PTZ Tracking Priority : if this mode is selected, in smart tracking mode, you cannot control PTZ by clicking the buttons
on the PTZ control panel in the live view interface.
Manual PTZ Control Priority : if this mode is selected, in smart tracking mode, you can control PTZ by clicking the
buttons on the PTZ control panel in the live view interface and then the camera will immediately stop the tracking action.
After you finish controlling PTZ for 5 seconds, the PTZ camera will return to the start tracking position and wait for the
object to appear.
Still time
: If it is enabled and the time is set, when the target stops or hides behind an obstacle, or the target tracking
is complete and there is no target appearing in the detection area during the set time, the PTZ camera will return to the
tracking start position. Of course, during this time, if there are targets moving, the PTZ will continue tracking. If it is not
enabled, when the target stops or there is no target appearing in the detection area for 5 seconds, the PTZ camera will
return to the start tracking position.
How to set smart tracking
:
1. Click Config Alarm Smart Tracking to go to the smart tracking interface. Select the tracking mode and set
the still time as needed.
2. Click Config Event. Select the event as needed. For example intrusion, enable the intrusion detection, select
detection target and then check “Trigger Track”. After that click “Save” to save the settings.
3. Set the alarm area and lock the PTZ.
Using the PTZ control buttons (area (1)) sets appropriate field of view and then draw the detection area and save the setting.
After that, click the “Lock” button to save the current PTZ position as the start tracking position). Now, the “Lock” button
changes its function to “Unlock”.
Note : Clicking the “Unlock” button suspends object tracking until you click the “Lock” button. If you want to change the
start tracking position, you can click “Unlock” button to enable PTZ control. After that, please remember to lock the PTZ,
or object tracking will not take effect.
4. Go back to the live view interface to view smart tracking.