Vimar Elvox 46235.030D Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 70

Vimar Elvox 46235.030D Скачать руководство пользователя страница 24

24

Graphic User Interface (GUI) for IP Speed Dome

EN

Click “Date and Time” to set the time mode.

5.1.3 Local Config

Go to Config

System

Local Config. You can set the storage path of the captured pictures and video records.

It is also possible to enable or disable the display of bitrate in recorded files.

5.1.4 SD Card

Go to Config

System

SD Card.

In the above interface, you can check the capacity, used capacity, remaining capacity and state of the SD card.

The first time you used the SD card, you should click “Format” to format SD card”.

Note:

Using of SD card function should be coordinated with alarm. When alarm is triggered, the

system will automatically snap picture and save the picture into SD card.

Also, here you can enable or disable "Local Smart Snapshot Storage". If enabled, captured images triggered by intel-

ligent events (such as line crossing detection, region intrusion, etc.) will be saved to your local PC.

Snapshot Quota:

Set the capacity proportion of captured pictures on the SD card.

Video Quota:

Set the capacity proportion of record files on the SD card.

«
...
22
23
24
25
26
...
»

Содержание Elvox 46235.030D







































































Отзывы:

Нет отзывов