Viale Vicenza, 14
36063 Marostica VI - Italy
www.vimar.com
49400892B0 06 2009
By-alarm
01710
Reset button
Pressing the push-button
PB1
located on the side of the card resets the micro-
processor without losing the configuration of the device and of the control panel
governing it.
INSTALLATION RULES
• Installation should be carried out by qualified personnel in compliance with the
current regulations regarding the installation of electrical equipment in the country
where the products are installed.
• The module can be installed on the control panels art. 01700, 01700.120, 01703,
01703.120 and on the power supply unit art. 01717, 01717.120.
• The module can be installed inside the box 01714 that, made of plastic, is
equipped with protection against opening and against tearing off the wall, thus
keeping the degree of IMQ-security systems certification of the entire system
unchanged. This enclosure is specially designed to contain all the accessory
devices of the intrusion detection alarm system.
Installation
1. Install the back of the box 01714 on the wall using a screw for fixing the
tamper.
2. Fix the springs provided on the module 01710 (conical spring on the front and
cylindrical spring on the back).
3. Install the module 01710 complete with springs in the box 01714.
2
3
4
5
6
1
2
3
4
5
6
1
4. Close the enclosure, fixing the cover to the box 01714.
REGULATORY COMPLIANCE
Standard EN 50131-3.
EMC directive.
Standards EN 50130-4, EN 61000-6-3.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces
of lead.
2
3
4
5
6
1
WEEE - Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not
be included with other general waste at the end of its working life. The user must take the worn product to
a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be
consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400 m
2
,
if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal
of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment
and people’s health, and encourages the re-use and/or recycling of the construction materials.
