Vimar 2911, Руководство по установке

Страница: 41 / 44

39
Parameters Functionality Value range
Enable under-temperature/
over-temperature alarm Enables monitoring and thus potentially generating
the corresponding alarms
- OFF
- ON
Under-temperature alarm
threshold on auxiliary probe Threshold that when crossed generates a tem-
perature control probe under-temperature alarm
notification
[-20..50]°C
Over-temperature alarm thresh-
old on auxiliary probe Threshold that when crossed generates a tem-
perature control probe over-temperature alarm
notification
[-20..50]°C
Temperature alarm reset hys-
teresis (DTA) Hysteresis used for automatically restoring the
temperature alarm condition
[0..10]°C
11.3 Limitation alarm
If the auxiliary probe is configured on limitation, the alarm status can be monitored and communicated via
the network interface in the By-clima applications paired with the timer-thermostat itself.
Parameters Functionality Value range
Enable limiter alarm Enables monitoring and thus potentially generating
the limiter trip alarm
- OFF
- ON
12. Warnings
1. The WiFi timer-thermostat cannot connect to "Enterprise Security" WiFi networks or networks requiring dynam-
ic exchange of authentication certificates or ones that in any case require registration/login via a Web Browser.
2. The WiFi timer-thermostat supports access to WiFi networks with WEP encryption with the following
limitations:
a. 64 or 128 bit WEP with a 10 or 26 character key in hexadecimal format (not ASCII).
b. WEP with Open key (Open)
c. WEP with shared key (Shared) NOT supported
3. Using a WiFi/3G router (which then uses the cellular network for access to the Internet) does not guaran-
tee an uninterrupted connection to the outside; it could therefore temporarily not be possible to control
the device remotely for reasons independent of Vimar Spa, but dependent on the telecommunications
provider or the current contract.
4. The WiFi timer-thermostat, if connected to the Vimar cloud service, generates periodic bidirectional net-
work traffic; keep this in mind if you have an Internet connection with a pay-as-you-go plan.
5.
It is not possible to use the By-clima app with a phone acting as an access point for the WiFi timer-thermostat
13. Cleaning the device
The timer-thermostat, featuring a display with capacitive buttons, requires you to be gentle during the
cleaning phase. Avoid using aggressive products. Clean the display with a special cloth for cleaning lenses.