Vimar 02907, Руководство по установке

Страница: 11 / 37

9
6. Configuration via WiFi interface
The thermostat 02907 features a WiFi interface that lets you configure and control your device remotely.
To function correctly, the WiFi interface must be properly configured by performing the first configuration pro-
cedure described in the next paragraph (6.1).
6.1 First Configuration
• First
identify the make and model of the client Gateway/Router
and keep note of them as a reference
for any official Vimar support (use the specific table in section 17).
• If there is already an Internet connection at the site of installation,
make sure the Gateway/Router has been
turned on for at least 2 minutes and is connected to the Internet
.
• Make sure the thermostat is installed at a reasonable distance (from the router), where the signal is
strong enough.
• Activate configuration mode; in this phase the thermostat acts as an access point, generating a specific
temporary WiFi network for the configuration with no need for an Internet connection.
6.1.1 Activating configuration mode
1. On the main screen, access the Settings menu by tapping the icon.
2. Using and scroll through the list of options until you see .
3. Confirm by touching
4. Check that the “ OnOF ” option is set to “ On ”; the display must show the following screen
exactly (“ OnOF ” flashes and “ On ” is on steady):
Configuration via WiFi interface