11
Villager
BC 2320 (EN)
Starting/stopping
1.
Press the start lock and then press the power switch to start.
2.
Release the power switch on the handle to stop.
Adjusting the angle of the trimmer head
The angle of the trimmer head can
be set between 0° and 90°C. The 90°
angle is intended for edge trimming.
1.
To change the angle, first push up
the control to adjust the trimming
angle (see diagram).
2.
Keep the control pressed in while
turning the trimmer head.
3.
Release the control when the
trimmer head is in the required
position.
4.
Make sure the control goes back to
the original position so that the
trimmer head locks.
Using the lawn trimmer to trim edges
1.
Set the trimmer head to an angle
of 90°.
2.
Make sure that both wheels (see
arrows) rest on the ground during
the work.
Содержание BC 2320
Страница 39: ...13 Villager BC 2320 RS ...
Страница 40: ...14 Villager BC 2320 RS ...
Страница 108: ......