Viking VK482 Скачать руководство пользователя

Страница: 19 / 19

REGULATORY AND HEALTH

WARNINGS

BULLETIN

The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058

Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: [email protected]

Visit the Viking website for the latest edition of this technical data page www.vikinggroupinc.com

Page 1 of 1

Form No. F_111218 18.11.15 Rev 18.1

New Bulletin

1. DESCRIPTION

Regulatory and Health Warnings applying to materials used in the manufacture and construction of fire protection products are

provided herin as they relate to legally mandated jurisdictional regions.

WARNING

STATE OF CALIFORNIA, USA

Installing or servicing fire protection products such as sprinklers, valves, piping etc. can expose you to chemicals including, but not li-

mited to, lead, nickel, butadiene, titaninum dioxide, chromium, carbon black, and acrylonitrile which are known to the State of California

to cause cancer or birth defects or other reproductive harm.
For more information, go to

www.P65Warnings.ca.gov

2. WARRANTY TERMS AND CONDITIONS

For details of warranty, refer to Viking’s current list price schedule at

www.vikinggroupinc.com

or contact Viking directly.

Содержание VK482




















Результаты поиска

Содержание VK482

Отзывы:

Похожие инструкции для VK482

Бренды по названию

Популярные бренды

Viking VK482, Быстрый старт

Результаты поиска

Содержание VK482

Отзывы:

Похожие инструкции для VK482

Бренды по названию

Популярные бренды