Viking VCBB360L, Руководство по обслуживанию

Страница: 5 / 56

5
Display Panel Operation
Keyboard Tone
Entry Tone
Indicates a pad was pressed, command read
and accepted, Turn off entry tone by pressing
and holding
Display On pad for 3 to 5 seconds.
Command Accepted Tone
Three short tones indicate command accepted.
Display On Pad
1. Activates control panel. Control panel
remains active at least 10 minutes.
2. Turns off Power Up Alarm (flashing lights)
after power is first plugged in or after power
outage.
Note: All pads, except Alarm Off, are inactive
until display On is pressed.
Freezer Temp Pad
Activates freezer temperature settings mode.
1. Freezer indicator light will glow. Freezer
temperature setting will be displayed.
Factory setting is 5.
2. Change freezer temperature setting by
pressing Warmer or Colder pad.
Ref Temp Pad
Activates refrigerator temperature settings
mode.
!.
Refrigerator indicator light will glow.
Refrigerator temperature setting will be
displayed. Factory setting is 5.
2. Change refrigerator temperature setting by
pressing Warmer or Colder pad.
Warmer Pad
Raises temperature settings one bar at a time.
If entry tone is on, tone will sound at each bar
level until top level is reached.
!.
Turn on temperature setting function of
control panel by pressing Warmer pad.
2. Press and hold Warmer pad to raise
temperature setting at a faster rate.
Colder Pad
Lowers temperature setting one bar at a time. If
entry tone is on, tone will sound at each bar
level until bottom level is reached.
1.
Turn on temperature setting function of
control panel be pressing Colder pad.
2. Press and hold Colder pad to lower
temperature setting at a faster rate.
Max Frz Pad
Activates Maximum freezer mode setting freezer
temperature to coldest setting for 24 hours or
until
Max Frz pad is pressed again.
1. Freezer indicator light will glow.
2. To adjust maximum freezer mode time
refer to Program Mode B functions.
Max Ref Pad
Activates Maximum refrigerator mode setting
refrigerator to coldest setting for 24 hours or until
Max Ref pad is pressed again.
!. Refrigerator indicator light will glow.
2. To adjust maximum refrigerator time refer
to Program Mode B functions.
Alarm Off Pad
Turns off alarm signals. See Alarms section to
interpret alarm signals.
!. Press
and hold Alarm Off pad for 3 seconds
to deactivate Door Open alarm. To
reactivate Door Open alarm, press and
hold Alarm Off pad for 3
seconds.
2. If Alarm Off pad is pressed and condition
causing alarm is not corrected, alarm will
reset .
*
*
Activates Program Mode. See Program Mode
section for description of functions available.
1.
Open refrigerator door.
2. Press Display On pad.
3. Press * pad.
4. Within 6 seconds press the following pads
in this sequence
; Max Ref, Max Frz, Max
Ref, Max Frz .
5. Tone will sound 3 times and control will be
in program mode A.
Display Off Pad
1. Deactivates control panel
2. Deactivates temperature indication area of
control panel.