6
To toggle Relay 1 back off, click on the
green circle, it changes to red, and Relay
1 turns off.
To activate a timed closure, click on the
Start button next to the relay. The
closure is activated for the number of
seconds shown in the box.
In the picture to the right, all four relays
have had timed closures activated.
Relay 1 and Relay 2 had short closures
and have already returned to the Off
state. Relay 3 and Relay 4 had longer
times programmed and are still in the On
position. When their times are up, they
will return to the Off position.
The
RC-4A
also provides a status
indication for the four inputs on the input
terminal block. In the picture below, Input
1 and Input 3 are shown as Open and
Input 2 and Input 4 are shown as Closed.
This indication is constantly refreshed so
that the input status indication is always
current.
Programming
From the main page, click on
Settings
. The
Settings
page
appears.
Note:
Only a user logged
in as administrator can make
changes on the Settings pages.
Guest users cannot make changes
and will get a “Programming pages
are locked” message at the bottom of
the Settings pages.
A. Settings Page
