6
If enabled and a busy is detected, the
E-30/32
phone will dial the next programmed
speed dial number, and continue to cycle through the numbers until a call is
completed. *
Notes:
This feature is enabled in the factory default setting. If the busy
signal is interrupted with a promotional message, contact your central office to have
it removed.
Setting E - Dial Next Number on Busy
Setting F - Future Use (set to 1)
Setting C - Silence Time Out
This feature selects the length of time that calls will remain connected without voice
activity. Programmable in increments of 10 seconds up to a maximum of 90
seconds (Touch Tones 1 - 9). To disable the silence time out, program 0 in this
location. Use chart at the far right. *
Note:
The factory default is 40 seconds.
Setting D - Dial Next Number on Ring No Answer
If enabled and a ring-no-answer is detected, the
E-30/32
phone will dial the next
programmed speed dial number, and continue to cycle through the speed dial
numbers until a call is completed.
* Note:
Factory set to redial if not answered after 7 rings.
Touch Tone
Silence Time Out
0
Disabled
1
10 seconds
2
20 seconds
3
30 seconds
4
40 seconds*
5
50 seconds
6
60 seconds
7
70 seconds
8
80 seconds
9
90 seconds
Touch Tone
Setting D
1 or 0
Disabled*
2, 3, 4... 9
Dials second number
after 2, 3, 4...9 rings
respectively
Touch Tone
Setting E
1
Disabled
2
Enabled*
Touch Tone
Setting D
1
Disabled
2
Enabled*
Settings A / B / C - Not Applicable
F. Miscellaneous Options
(memory location #17)
Dial: A + B + C + D + E + F + # + 1 + 7
Factory Default Setting: 0 + 0 + 0 + 2 + 1 + 0
Not Applicable (enter 0)
Hang-up on Return to Dial Tone
Double Ring Cadence
Lap Counter
Enter Settings Here:
A B C D E F
0 0 0 #17
If enabled and a return dial tone is detected, the
E-30/32
will hang up.
*
Note:
The factory default setting is enabled.
Setting D - Hang Up on Return to Dial Tone
The
E-30/32
can be programmed to recognize the double ring cadence that is typical of many
phone systems. If the
E-30/32
is connected to an extension that provides a double ring
cadence, enabling this mode will allow for proper call progress detection.
*
Note:
This feature is disabled in the factory default setting.
Setting E - Double Ring Cadence Mode
Touch Tone
Setting E
1
Disabled*
2
Enabled
With the lap counter disabled (factory setting), if the
E-30/32
is programmed to dial the next
number on ring-no-answer and/or busy signal (see page 5 and 6), the
E-30/32
will
continuously call its programmed phone numbers forever until the call is answered.
Setting F - Lap Counter
The lap counter is a programmable counter that determines how many times the
E-30/32
will cycle through its list of up to 5
numbers, before it stops the dialing process and hangs up. When all of the programmed phone numbers have been dialed, the
lap counter is incremented and the dialing process repeats. When the lap counter has been met, the dialing process stops and
the
E-30/32
hangs up.
*
Note:
This feature is disabled in the factory default setting.
Touch Tone
Setting F
0
Disabled*
1-9
Lap count: 1-9 times
