5
C. Quick Programming Features
D. Speed Dial Numbers
The speed dial number programmed in location
#00
is the telephone or extension number that is
dialed when the “
Call
” button is first pressed. Additional speed dial numbers will be dialed when
there is no answer or a busy signal is detected and the next number redial features are activated.
The
E-30/32
will cycle through the programmed speed dial numbers until answered. To program,
enter the desired speed dial number followed by the memory location number (
#00 - #04
).
To clear a speed dial location, simply enter the memory location (
#00 - #04
) alone. The
E-30/32
is factory set with no speed dial number programmed.
Note:
Up to 20 digits can be stored in each dial position. Special features such as pause, mode change, touch tone
Q
and
#
count as single digits.
Description
Enter Digits
+
Memory Location
First speed dial number
0-20 digits
then
#00
Second speed dial number
0-20 digits
then
#01
Third speed dial number
0-20 digits
then
#02
Fourth speed dial number
0-20 digits
then
#03
Fifth speed dial number
0-20 digits
then
#04
To add a
Q
at any point in the dialing string
To add a
#
at any point in the dialing string
Q
#
To add a four second pause at any point in the dialing string
Q
7
Miscellaneous options (factory set to 000210)
6 digits
then
#17
Timing/Dialing options (factory set to 234721)
6 digits
then
#18
Security code (factory set to 845464)
6 digits
then
#19
Exit programming and disconnect
#7
Reset all programming to factory default settings
###
To Program:
Enter:
Q
#
Q
#
4 second pause
Q
7
0, 1, 2 .... 9
0, 1, 2 .... 9
Setting B - Call Length Time Out
This feature selects the maximum length of time that calls can be connected.
Programmable in increments of 1 minute up to a maximum of 9 minutes (Touch
Tones 1 - 9). Program 0 in this location to disable the call length time out. With the
call length disabled, the
E-30/32
phone must rely on a CPC signal, busy signal,
silence or return to dial tone to hang-up. Use chart at the right.
*
Note:
The factory default is 3 minutes.
E. Timing/Dialing Options
(memory location #18)
There are six positions in the timing/dialing options. To program these options, enter the six desired timing/dialing
numbers followed by
#18
. The six available timing/dialing options are defined as follows:
Dial: A + B + C + D + E + F + # + 1 + 8
Factory Default Setting: 2 + 3 + 4 + 7 + 2 + 1
Talk/Listen Delay
Call Length
Silence Time Out
Dial Next Number on Ring No Answer
Dial Next Number on Busy
Future Use (set to 1)
Enter Timing/Dialing Settings Here:
A B C D E F
#18
Setting A - Talk/Listen Delay
This feature selects switching time between talk and listen modes (VOX switching
time). Use chart at the right. *
Note:
The factory default is .2 seconds.
Touch Tone
Talk/Listen Delay
1
0.1 seconds
2
0.2 seconds*
3
0.3 seconds
4
0.4 seconds
5
0.5 seconds
6
0.6 seconds
7
0.7 seconds
8
0.8 seconds
9
0.9 seconds
Touch Tone
Call Length Time Out
0
Disabled
1
1 minute
2
2 minutes
3
3 minutes*
4
4 minutes
5
5 minutes
6
6 minutes
7
7 minutes
8
8 minutes
9
9 minutes
