19
Service Diagnostics and Procedures
© 2011 Viking Preferred Service
Gas Valve Replacement
To access Gas Valve:
1.
Remove main top
(see Main Top Access section,
page 16).
2. Remove wiring connectors.
3. Disconnect burner pipe.
4.
Remove securing screw, mounting bracket, and
gas valve.
5. Repair/replace gas valve as necessary.
6. Reverse procedure to reinstall.
Note:
When reinstalling
gas valve to manifold
pipe assembly, make
sure that gas valve
fitting and manifold
pipe assembly opening
align correctly.
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect gas supply and electrical power to unit
before servicing. After servicing, reconnect electrical power and gas supply. Before placing appliance into
operation, always check for gas leaks with soapy water solution.
DO NOT
USE AN OPEN FLAME TO
CHECK FOR GAS LEAKS.
Gas Valve
Connectors
Burner Pipe
Screw
Bracket
Opening
Gas Valve Fitting
