© 2011 Viking Preferred Service
8
Operation
Adjusting Controls
The Fresh Food Temp control adjusts the
refrigerator compartment temperature. The Freezer
Temp control adjusts the freezer compartment
temperature.
If you need to adjust the temperature in either
the refrigerator or freezer compartment, use the
settings listed in the chart shown below as a guide.
Adjusting the Control
Twenty four hours after adding food, you may
decide that one or both compartments should
be colder or warmer. If so, adjust the control as
indicated in the Temperature Control Guide below.
UÊÊ Ê/ iÊwÀÃÌÊÌÕV ÊvÊÌ iÊ1*ÊÀÊ"7 Ê«>`ÃÊÃ ÜÃÊ
the current temperature setting.
UÊÊ Ê/ iÊ`ë>ÞÊÜÊà ÜÊÌ iÊiÜÊÃiÌÌ}ÊvÀÊ
approximately three seconds, and then return
to the actual temperature currently within that
compartment.
UÊÊ ÊÊÌÊV >}iÊiÌ iÀÊVÌÀÊÀiÊÌ >ÊiÊ
degree at a time. Allow temperature to stabilize
for 24 hours before making a new temperature
adjustment.
Temperature Adjustment Chart
Condition/Reason
Adjustment
Refrigerator too warm
Fresh Food Control
1° lower
Freezer too warm/too
little ice
Freezer Control
1° lower
Refrigerator too cold
Fresh Food Control
1° higher
Freezer too cold
Freezer Control
1° higher
Options
Max Ice
When activated, Max Ice reduces the freezer
temperature to the optimum setting for 24 hours in
order to produce more ice.
Note:
When the Max Ice feature is in operation, the
freezer UP and DOWN control pads will not operate.
Water Filter Indicator
When a water filter has been installed in the
refrigerator, the yellow order light will illuminate
when 90 percent of the volume of water for which
the filter is rated has passed through the filter.
The red replace light will illuminate when the rated
volume of water has passed through the filter.
A new filter should be installed immediately when
the replace light is illuminated. After replacing
the filter, press and hold the “WATER FILTER
INDICATOR” button for three seconds. The order
and replace lights will go off.
Vacation Mode
The Vacation Mode feature causes the freezer to
defrost less frequently, conserving energy. The
vacation mode indicator light will illuminate when
the feature is activated. To deactivate, press
the “VACATION MODE” pad again OR open either
door. The indicator light will go out.
Note:
Door openings will not deactivate the
Vacation Mode for approximately one hour after
activation.
High Temp Alarm
The high temp alarm system will alert you if the
freezer or refrigerator temperatures exceed normal
operating temperatures due to a power outage
or other event. When activated, the high temp
alarm light will illuminate. If the freezer or
refrigerator temperatures have exceeded these
limits, the display will alternately show the current
compartment temperatures and the highest
compartment temperatures reached when the
power was out. An audible alarm will sound
repeatedly. Press the “HIGH TEMP ALARM”
pad once to stop the audible alarm. The high
temp alarm light will continue to flash and the
temperatures will alternate until the temperatures
have stabilized. To turn off High Temp Alarm, press
and hold the “HIGH TEMP ALARM” pad for three
seconds. The indicator light will go off.
