© 2011 Viking Preferred Service
14
Diagnostics
Entering Programming Mode (continued)
10. Once the desired program code is entered, press and hold the freezer temperature “DOWN” keypad
until the program code begins fl ashing indicating it has been saved.
Note:
If you attempt to enter an invalid program code, the control will not save the new code, but will
beep. (The unit will
NOT
run with a program code of 0000). Once the program code has been saved, the
Programming Mode is exited by pressing any key. If the new code is incorrect, this process should be
repeated.
Note:
The Programming Mode can be exited at any time by pressing “DOOR ALARM” key for three seconds
or will exit if unattended for four minutes.
P E
0 1 0.
