Viking 443, Инструкция по эксплуатации

Страница: 35 / 496

9 0478 111 9912 I - EN
DE
EN
FR
NL
IT
ES
PT
NO
SV
FI
DA
PL
SL
SK
TR
Maintenance interval:
Each time the appliance is
used
Clean the appliance thoroughly
after mowing. Looking after
your appliance carefully will
protect it against damage and
extend its service life.
Clean the underside of the
mower with water and a brush.
Detach accumulated cutting
deposits in the housing and in
the ejection chute beforehand
using a stick.
Clean the mowing blade.
Never spray water onto
engine components, seals,
bearing points or electrical
parts such as switches. This
would result in expensive
repairs.
Do not use aggressive
cleaning agents. These
cleaners can damage plastics
and metals, impairing safe
operation of your VIKING
mower.
If you are unable to remove
the dirt with water, using a
brush or a cloth, VIKING
recommends the use of a
special cleaner (e.g. STIHL
special cleaner).
Please note:
Tilt up front of mower when
carrying out cleaning or
maintenance work. Never tilt
to the side, otherwise petrol
will run out.
Empty the fuel tank (run
empty), release the rotary
handles and lift the ejection
flap before tilting upwards.
17
Cleaning the
appliance
Maintenance interval:
See engine instruction
manual
Observe the operating and
maintenance instructions
con tained in the attached
engine instruction manual. To
achieve a long service life, it
is always particularly impor -
tant to maintain a sufficient
level of oil and to change the
oil and air filter regularly.
The cooling ribs must always
be kept clean to ensure that
the engine is adequately
cooled.
Combustion engine
Maintenance
CAUTION
Disconnect the spark
plug socket before
performing any
maintenance or other work
on the blade.
Do not touch the blade until it
has come to a standstill.
Always allow the engine to
cool before carrying out main -
tenance and cleaning work.
If you do not have the
necessary expertise or
auxiliary equipment, please
always contact a specialist
dealer.
VIKING recommends that you
have maintenance operations
and repairs performed
exclusively by a VIKING
specialist dealer.
VIKING recommends the use
of original VIKING tools,
accessories and spare parts.
Risk of injury.
Always wear gloves.
Emptying the grass
catcher bag
If the level indicator closes
(
STOP position), the grass
catcher bag is full and must
be emptied.
22= Open the grass catcher
bag at tab and fold the
grass catcher bag upper
part upwards.
Fold back the full grass
catcher bag.
24= The grass catcher bag
can be emptied easily
via the integral handle
23= on the grass catcher bag
lower part and the
integral handle on the
grass catcher bag upper
part.
After emptying, close the
upper part and lock back into
position.
14
CAUTION
Risk of injury.
Always stop the engine
before removing the grass
catcher bag.