Manual
11/29/2018
PSFEM6xxxxZxxx
Viking Technology
Revision G
Page 8 of 41
www.vikingtechnology.com
Table of Tables
Table 2-1: Maximum Sustained Read and Write Bandwidth using MLC NAND _____________ 13
Table 2-2: Sequential Read /Write Bandwidth (Iometer 06) using MLC NAND _____________ 13
Table 2-3: Random Read/ Write Input/Output Operations per Second (IOPS) (Iometer 06) using
MLC NAND __________________________________________________________________ 14
Table 2-4: Sequential Read /Write Bandwidth (Iometer 06) using TLC NAND _____________ 14
Table 2-5: Random Read/ Write Input/Output Operations per Second (IOPS) (Iometer 06) using
TLC NAND __________________________________________________________________ 15
Table 2-6: STANDBY IMMEDIATE Timing _________________________________________ 15
Table 2-7: Absolute Maximum Ratings ____________________________________________ 15
Table 2-8: Operating Voltage ____________________________________________________ 17
Table 2-9: Current Draw ________________________________________________________ 18
Table 2-10: Typical Power Consumption at 3.3V using MLC NAND _____________________ 18
Table 2-11: Typical Power Consumption at 3.3V using TLC NAND ______________________ 18
Table 2-12: Temperature and Altitude Related Specifications ___________________________ 19
Table 2-13: Shock and Vibration Specifications ______________________________________ 20
Table 2-14: Reliability Specifications ______________________________________________ 21
Table 3-1: M.2 SSD weight ______________________________________________________ 26
Table 4-1: M.2 SATA Connector Pin Signal Definitions ________________________________ 26
Table 5-1: Supported ATA Commands ____________________________________________ 27
Table 5-2: List of Device Identification _____________________________________________ 31
Table 5-3: S.M.A.R.T. Command Set ______________________________________________ 36
Table 5-4: Extended SMART Attribute Table ________________________________________ 36
Table 5-5: Extended SMART Attribute Actual Data ___________________________________ 37
Table 5-6: Supported S.M.A.R.T. EXECUTE OFF-LINE IMMEDIATE Subcommands ________ 40
Table of Figures
Figure 1-1: High-Level Block Diagram _____________________________________________ 10
Figure 3-1: Dimensions ________________________________________________________ 22
Figure 3-2: Dimension Details for M.2 42mm length __________________________________ 23
Figure 3-3: Dimension Details for M.2 card edge _____________________________________ 24
Figure 3-4: Dimension Details for M.2 connector and notch ____________________________ 25
