14
SECURING THE WINE CELLAR (3 OPTIONS)
OPTION 1
If a solid soffit is 1” (2.5 cm) or less above the wine cellar, anti-tip boards are not required. To secure the wine cellar
raise unit until compartment is firmly seated under the soffit.
OPTION 2
If a solid soffit is not available or soffit is more than 1” (2.5 cm) above wine cellar, center wood boards on rear wall 1/4”
(.6 cm) maximum above wine cellar. Attach wood boards to wall studs with six of the provided wood screws, making
sure that screws are engaged in wall studs 1 1/2” (3.8 cm) minimum and that boards extend 2” (5.0 cm) minimum over
the top rear of wine cellar compressor cover. To secure the wine cellar, raise unit until compartment is firmly seated
under the anti-tip board.
OPTION 3
Position the wood block over the unit and secure it to wall studs using eight of the provided wood screws and “L”
brackets. Make sure screws extend a minimum of 1” (2.5 cm) into each of the two wall studs. The wood block must
extend a minimum of 3” (7.6 cm) over the unit. To secure the wine cellar, raise unit until compartment is firmly seated
under the anti-tip boards.
E
Elle
eccttrriiccaall S
Sh
ho
occkk H
Haazzaarrd
d
D
Diisscco
on
nn
ne
ecctt p
po
ow
we
err aatt b
brre
eaakke
err o
orr ttu
urrn
n p
po
ow
we
err d
diisscco
on
nn
ne
ecctt ssw
wiittcch
h
tto
o O
OF
FF
F p
po
ossiittiio
on
n b
be
effo
orre
e p
pe
errffo
orrm
miin
ng
g aan
nyy iin
nssttaallllaattiio
on
n
p
prro
occe
ed
du
urre
e.. F
Faaiillu
urre
e tto
o d
do
o sso
o ccaan
n rre
essu
ulltt iin
n d
de
eaatth
h o
orr e
elle
eccttrriiccaall
ssh
ho
occkk..
Solid Soffit
1”
(2.5 cm)
or less
1/4” (.6 cm)
maximum
Rear
wall
2” (5.0 cm)
minimum
OPTION 1
OPTION 2
OPTION 3
Two 2X4
boards
attached to
wall with six
wood screws
(minimum)
1/4” (.6 cm)
maximum
3” (7.6 cm)
minimum
“L” bracket
with (4) screws
on each end.
(1) 2X4
attached to
both “L”
brackets -
minimum of
1” (2.5 cm)
screws
Screws extend
minimum of
1” (2.5 cm)
into each wall
stud.
