9
INSTALLATION OF HOLD DOWN
BRACKET FOR VGSU MODELS
1. After installation of the cooktop, locate the two sheet
metal screw holes on each end of the bottom of the
burner box. Screw hold down brackets (Item 1) using
the #10 x 1/2” sheet metal screw (Item 2) to the burner
box.
2. Screw the eye bolt (Item 3) into the self-retaining nut
(Item 4) and tighten firmly aganist bottom of
countertop.
DIMENSIONS FOR INSTALLATION OF VGSU OVER SINGLE ELECTRIC OVEN
36”
(91.4 cm)
min.
28-1/8”
(71.4 cm)
5”
(12.7 cm)
max.
5”
(12.7 cm) max.
3”
(7.6 cm) min.
28-1/2”
(72.4 cm)
34”
(86.4 cm)
36”
(91.4 cm)
min.
28-3/4”
(73.0 cm)
18-5/8”
(47.3 cm)
3”
(7.6 cm)
min.
18-5/8”
(47.3 cm)
34-3/8”
(87.3 cm)
26-7/8”
(73.3 cm)
16-7/8”
(42.9 cm)
17-9/16”
(44.6 cm)
17”
(43.2 cm)
17”
(43.2 cm)
14-1/4”
(36.2 cm)
14-5/8”
(37.2 cm)
14-1/4”
(36.2 cm)
12-1/4”
(31.1 cm)
C
L
C
L
VGSU103
30” min. cutout
VESO130/530
30” min. cutout
VGSU163
36” min. cutout
VESO166
36” min. cutout
OPTIONAL INSTALLATION OF GASKET
If desired, the gasket can be installed to eliminate the space between the countertop and the cooktop. This will help
prevent spillovers into the cabinet underneath the cooktop.
1. Remove the roll of gasket material from your packed-
with items.
2. Turn your cooktop upside down on a flat surface. Make
sure to place some protective material between the
cooktop and the surface.
3. Peel the plastic covering from the gasket material.
4. With the adhesive side down, stick the gasket material
all the way around the burner flange.
IMPORTANT:
Make sure the corners are covered completely, leaving
no air gaps
.
5. Turn the cooktop over and place into the countertop
cutout.
8
VGSU Height Dimension
30” W. VGSU Top Dimensions
36” W. VGSU Top Dimensions
30-3/4” (78.1 cm)
21”
(53.3 cm)
NOTE:
Narrow edge of
grate goes toward
center of unit
NOTE:
Narrow edge of
grate goes toward
center of unit
21”
(53.3 cm)
36- 3/4” (93.3 cm)
1”
(2.5 cm)
2-1/2” (6.4 cm)
5” (12.7 cm)
6-19/32”
(16.7 cm)
13/16” (2.1 cm)
Содержание DGCU105
Страница 10: ...19 18 ...