**
Access Doors sold separately - refer to access door
installation instructions for correct dimensions.
*IMPORTANT
Cabinet cutout must have a solid bottom
to support the full weight of the unit.
IMPORTANT
Cutout dimensions will be different when installing
next to combustible materials and using an INJK
insulated jacket kit (sold separately).
Cutout Dimensions
(30” W. Grill)
12
10-1/8”
10-1
/8”
(25.7 cm)
(25.7
cm
)
36”
36”
(91.4 cm)
(91.4
cm
)
**Access door opening
**Ac
cess
door
ope
ning
24-3/8”
24-
3/8
”
(61.9 cm)
(61
.9 c
m)
29-1/4”
29-1
/4”
(74.3 cm)
(74.3
cm
)
3”
3”
(7.6 cm) min.
(7.6 c
m) m
in.
Electrical connection
Electrical connection
for rotisserie motor
for rotisserie motor
(position unit so that
(position unit so that
the plug is always
the plug is always
accessible)
accessible)
Electrical connection
Electrical connection
for power supply cord
for power supply cord
to be located on rear
to be located on rear
wall with a maximum
wall with a maximum
distance of 24” (61.0 cm) beneath
distance of 24” (61.0 cm) beneath
solid bottom support or a minimum
solid bottom support or a minimum
of 2” (5.1 cm) from floor.
of 2” (5.1 cm) from floor.
*Solid bottom
*So
lid b
otto
m
support
sup
port
Countertop typically requires
Countertop typically requires
1” (2.5 cm) wide by 1” (2.54)
1” (2.5 cm) wide by 1” (2.54)
deep notch cutout on each
deep notch cutout on each
side of grill. This allows grill
side of grill. This allows grill
control panel to sit back
control panel to sit back
properly in the cutout.
properly in the cutout.
Gas inlet and power cord
Gas inlet and power cord
location area
location area
5”
5”
(12.7 cm)
(12
.7
cm
)
1”
1”
(2.5 cm)
(2.5
cm
)
1”
1”
(2.5 c
m)
(2.
5 c
m)
