27
Performance
Checklist
A qualified installer should carry out the
following checks:
• All internal packaging removed.
• Specified clearances maintained to
combustible materials.
• Pressure regulator connected and set.
• Manual shut-off valve installed and accessible.
• Check air shutter adjustment - sharp blue
flame, no yellow tipping.
• Check for gas leaks (odors) at all gas
connections.
• Each burner lights satisfactorily, individually or
with adjacent burners lit.
Any adjustments necessary that are the
result of the installer not following
instructions will be responsibility of the
installer, dealer or the end user of the
product.
Final Preparation
• Some stainless steel parts may have a plastic
protective wrap which must be peeled off. The
interior should be washed thoroughly with hot,
soapy water to remove film residues and any
dust or debris before being used, then rinsed
and wiped dry. Solutions stronger than soap
and water are rarely needed.
• All stainless steel body parts should be wiped
with hot, soapy water and with a liquid cleaner
designed for this material. If buildup occurs, do
not use steel wool, abrasive cloths, cleansers,
or powders!
If it is necessary to scrape stainless steel to
remove encrusted materials, soak with hot,
wet cloths to loosen the material, then use
a wool or nylon scraper. Do not use a
metal knife, spatula, or any other material
tool to scrape stainless steel! Scratches are
almost impossible to remove..
Service &
Registration
Only authorized replacement parts may be used in
performing service on the appliance.
All servicing should be referred to a qualified
technician.
Contact Viking Range, LLC, 1-888-(845-4641), for the
nearest service parts distributor in your area or write
to:
VIKING RANGE, LLC
PREFERRED SERVICE
111 Front Street
Greenwood, Mississippi 3
8
930 USA
Record the following information indicated below. You will
need it if service is ever required.
The serial number and model number for your grill are
located underneath the pullout drip tray on the left hand
side.
Model number
_________________________________________________________
Serial number
_________________________________________________________
Date of purchase
_________________________________________________________
Date installed
_________________________________________________________
Dealer's name
_________________________________________________________
Address
_________________________________________________________
_________________________________________________________
These installation instructions should
remain with the unit
for future reference.
