System Board Jumper Settings
Figure 3:
System Board Jumper Settings
T
able 4:
Clear CMOS Jumper Settings
Functi
on
Jumper
(JP1)
Configuration
Save
CMOS
(Default
)
1-2
The BIOS uses current configuration information and
passwords for booting.
Clear
2-3
Turn off the system and unplug the power cord. Move the
jumper from pins 1-2 (default) to pins 2-3 for about 5~10
seconds. Then move the jumper back to pins 1-2.
NOTE:
Except when clearing the rtc ram, never remove the jumper on JP1 default
position. Removing the jumper will cause system boot failures.
Table
5:
Front Panel Audio Jumper Settings
Function Jumper
Configuration
Normal
5 – 6
and
9- 10
The audio line signals are routed back to
the line connector.
V1.0 VIG590M Motherboard Manual
23
