Viglen EQ100, Руководство пользователя

Страница: 22 / 70

EQ100 Motherboard User Guide V2.0
21
Installing and Removing Memory
The system motherboard comes with two Double Data Rate 2 (DDR2) Dual Inline
Memory Module(s) (DIMM) sockets that support up to 2GB system memory using
unbuffered ECC and non-ECC PC2-3200/4200/5300 DIMMs.
Figure 4: Installing System memory
CAUTION: Make sure only identical Viglen certified memory modules
are installed in the Viglen EQ100 unit. Please contact Viglen Technical
Support for the latest approved memory list.
Memory Configurations
The Viglen EQ100 supports up to 2GB of system memory using 256Mb, 512MB and
1GB DDR2 DIMMs.
•
Installing DDR2 DIMMs other than the recommended con fi gurations may cause
memory sizing error or system boot failure.
•
Install only identical (the same type and size) DDR2 DIMM in DIMM_A1 and
DIMM_B1.
•
Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from Viglen Ltd to guarantee
consistency in product.
•
Due to chipset resource allocation, the system may detect less than 2GB system
memory when you installed two 1GB DDR memory.
•
This motherboard does not support memory modules made up of 128Mb chips or
double-sided x16 memory modules.
Installing Memory
1. Observe the precautions in “Upgrading and ESD precautions”. Turn off the
computer and all peripheral devices.
2. Remove the computer cover and locate the DIMM sockets.