Viglen EQ100, Руководство пользователя

Страница: 35 / 70

EQ100 Motherboard User Guide V2.0
34
Figure 23: Utility Updating the System BIOS
CAUTION!
Do not shut down or reset the system while updating the BIOS to prevent system
boot failure!
5. The utility returns to the DOS prompt after the BIOS update process is
completed. Reboot the system from the hard disk drive.
Figure 24: BIOS Update Complete
BIOS Setup Program
This motherboard supports a programmable firmware chip that you can update using
the provided utility described above.
Use the BIOS Setup program when you are installing a motherboard, reconfiguring
your system, or prompted to “Run Setup”. This section explains how to configure
your system using this utility.
Even if you are not prompted to use the Setup program, you can change the
configuration of your computer in the future. For example, you can enable the
security password feature or change the power management settings. This requires
you to reconfigure your system using the BIOS Setup program so that the computer
can recognise these changes and record them in the CMOS RAM of the firmware
hub.
The firmware hub on the motherboard stores the Setup utility. When you start up the
computer, the system provides you with the opportunity to run this program. Press
<Del> during the Power-On-Self-Test (POST) to enter the Setup utility; otherwise,
POST continues with its test routines.
If you wish to enter Setup after POST, restart the system by pressing
<Ctrl+Alt+Delete>, or by pressing the reset button on the system chassis. You can