22
Multiple Port Configuration Window
1.13.1 Detection Type
The “Multiple Port Configuration” window enables a way to apply the same
configuration to multiple ports in a single screen. This is the fastest way to configure
multiple ports with identical characteristics.
Figure 6: Multiple Port Configuration Window
Different PoE devices may respond to differences in detection pulses. If your device
does not turn on, try changing this setting.
Choose the detection type to be used for selected ports, matching it to the camera
requirements. Most cameras will work in the default position.
“None” for bypassing detection.
“2-point” for 2-point detection.
“4-point” for 4-point detection.
“4-point+legacy” for 4-point followed by legacy.
“2-point+legacy” for 2-point followed by legacy.
“Legacy” for legacy detection only.
This option will be considered the next time a “detection" is performed on a port.
This will not affect ports currently in a power delivering state. To apply a change of
the detection type, disable, and then enable the port.
