2
Vi2216LT Series Ethernet Midspan Installation Manual
Read and keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Install in accordance with the manufacturer’s instructions.
This installation should be made by a qualified service person and should conform to all local
codes.
DO NOT bundle UTP or UTP signals in the same conduit as high-voltage wiring.
To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture,
dripping, or splashing.
No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.
DO NOT install the unit in a place where the operating ambient temperature exceeds 75°C.
Make sure that the external power supply output voltage is in the recommended range.
Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including DVRs) that produce heat.
Protect the power cord from being walked on or pinched particularly at power source,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as when a power supply cord or plug is damaged, liquid
has been spilled, objects have fallen inside the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
The main plug is used as the disconnected device and shall remain readily operable.
