21
1.11.2 ILIM/ICUT
Configuration
1.11.3 System
Configuration
1.11.4 Chip ID
1.11.5 SW Version
1.11.6 Max Ports
1.11.7 Power Available
1.11.8 Power
Allocated
1.12.1 Commands
1.12.2 Query
1.12.3 Apply
Set the “Current Limit and Current Cut Limit” (ILIM/ICUT).
This section displays the status information about the Midspan.
This shows the current PSE control chip revision.
This shows the current running firmware version.
This shows the maximum number of Midspan ports detected by the software.
This shows the total available power for the Midspan.
This shows the total power allocated by the system. Power allocated varies based on
the power management mode selected.
Click the “Query” button to update the status fields.
Click the “Apply” button to configure the system with the inputted values.
