5 / 19
IR OUT port
Description of ENC/DEC LED:
(1) When the device is powered on, the ENC/DEC LED
flashes for about 15 seconds, and then keeps on, indicating the current ENC/DEC mode.
Press and hold the MODE button for 5 seconds to switch to another mode. The
corresponding ENC/DEC LED flashes for about 30 seconds and then stays on, indicating
that the mode is switched successfully.
(2) The user can also turn on the SHOW ME mode of the device by the Controller box.
At this time, the ENC/DEC LED flashes to indicate the current corresponding ENC/DEC
device, so that the user can easily find the device.
5.2 Rear Panel
No.
Name
Function Description
1
DC 12V
DC 12V power input port.
2
RS-232
Connect to PC or control system with a 4-pin phoenix
connector cable for RS-232 signal pass-through.
‘12V’ means that the product can supply power to the
outside.
3
IR IN port
IR signal input port.
4
IR OUT port
IR signal output port.
5
HDMI IN port
HDMI signal input port (ENC). Connect to HDMI source
devices such as DVD or Set-top box with HDMI cable.
6
HDMI OUT port
HDMI signal output port.
▪
ENC mode: Used to loop out HDMI IN signal.
▪
DEC mode: Used to output remote Encoder video stream
signal.
7
10G BASE-T port
10G network cable port. Connect to 10G Switch for video
transmission.
8
SFP+ port
10G network optical fiber port. Connect to 10G Switch for
video transmission.
9
1G LAN port
1G network port
.
Connect to the network port of the
corresponding application, such as 1G Ethernet or
Secondary Stream transmission.
