13 / 19
and cannot be set. If Auto is set to OFF, then Horizontal and Vertical can be
set to the resolution of the Mainstream encoding. The horizontal range is
960~1920, the vertical range is 540~1080, and it needs to be an even number.
Click the “Apply” button to take effect.
The Resolution of the Sub Stream includes Horizontal and Vertical. Horizontal
and Vertical can be set to the resolution of the Sub Stream encoding. The
horizontal range is 320~960, the vertical range is 180~540, and it needs to be
an even number. Click the “Apply” button to take effect.
Bitrate is used to set the bit rate of the encoding.
■
Setting Page
The setting page includes two parts: Network and Login.
The network can be set to Static or DHCP. When set to Static, you can enter IP
address, gateway, and subnet mask; When set to DHCP, the IP address,
gateway, and subnet mask are grayed out and cannot be edited. A DHCP server
(e.g. network router) that automatically assigns IP-related settings should be
installed in the system. Web Port is the port of the Web page. After setting, click
“Save” to take effect. After setting the IP address, the page will automatically
switch to the set IP address. Click “Set Network Defaults”, and it will be restored to
the default DHCP state.
The Web login password can be changed on the “Login” part. Enter the old
password in “Old Password”, enter the new password in “New Password”, enter
the new password again in “Confirm Password”, and click the “Save” button to
take effect.
