19 / 19
Notes:
(1) For the default IP mode of the Control LAN port of the Controller Box is
DHCP, the PC also needs to be set to “Obtain an IP address automatically”
mode, and a DHCP server (e.g. network router) is required in the system.
(2) If there is no DHCP server in the system, 192.168.0.225 will be used as
the IP address of the Control LAN port. You need to set the IP address of
the PC to be in the same network segment. For example, set the PC’s IP
address as 192.168.0.88.
(3) You can access the Web GUI by inputting the Control LAN port IP address
(192.168.0.225) or URL "http://controller.local" on your computer's browser.
(4) No need to care about the settings of the Video LAN port of the
Controller Box, they are managed by Controller automatically.
(5) When the Network Switch does not support PoE, the Encoder, Decoder,
and Controller Box should be powered by DC power adapter.
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
