2. CONTROLS & SETTINGS
2. 1: Controls:
2. 1. 1 Control key board:
INPUT MENU U+ U- CH+ CH- POWER
1. “INPUT”
Use this to select an input source or an item.
2. “MENU”
Use this to select an menu or an item.
3. “U+”
Use to increase the chosen item.
4. “U-”
Use to decrease the chosen item.
5. “CH+”
Use this to move up on the on-screen menu.
6. “CH-”
Use this to move down on the on-screen menu.
7. “Power”
Use this switch to turn on the monitor. Press this button again to turn off the monitor.
The indicators display the status of the power.
Indicator Status
Lit (Red) Power off
Lit (Green) Power on
Blinking (Red) Power saving mode
POWER CONNECTOR (DC)
Plug the power connector of the adapter into the respective DC socket.
Power BUTTON
This is used to switch the monitor on and off. The blue LED lights up when the monitor is on. When it is red it
shows standby condition.
VOLUME BUTTONS [3-4] AND CONFIRM [1]
They allow to change the volume (3 button increases the volume – 4 button decreases the
volume).
MENU BUTTON [2] AND CONFIRM
This is used to access and quit the OSD (On-Screen Display) Menu and to confirm the selected settings
VIDEO INPUT SELECTION BUTTON [1]
To select the desired signal (“”HDMI”, “DVI”, “” or “VGA”) press the
button (
2
) to select the desired item. Press the button (
3-4
) “U+” and “U-” to confirm.
HDMI INPUT
It allows the connection of an HDMI signal and an audio signal, coming from an external source provided with an
HDMI output
DVI SIGNAL INPUT
PC input.
PC SIGNAL INPUT (VGA)
PC input.
AUDIO INPUT/OUTPUT(VGA)
Jack plugs audio input/output.
NO SIGNAL It means that no video signal is detected.
Содержание PD195WHV
Страница 1: ...LED Monitor Operation Manual...