ViewSonic VS14569-1M, Руководство пользователя

Страница: 6 / 59

ENGLISH
iv
ViewSonic VT2755LED
ImportaNt SafEty
INStructIoNS
Dangerous Voltage: The lightning flash with
arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of
dangerous voltage within the inside of the product
that may be sufficient level to constitute a risk of
electric shock to persons.
Instruction: The
exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and servicing instructions in
the literature accompanying the appliance.
Read these instructions completely before using the
1.
equipment.
Keep these instructions in a safe place.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not use this apparatus near water.
5.
Clean with a soft, dry cloth.
6.
Do not block any ventilation openings. Install the equipment
7.
in accordance with the manufacturer’s instructions.
Do not install near any heat sources such
8.
as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce
heat.
Do not attempt to circumvent the safety
9.
provisions of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third
grounding prong. The wide blade and the third prong are
provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of
the outlet.
Prevent the power cord from being tread upon or pinched,
10.
particularly at the plug, convenience receptacles, and the
point where they exit from the device. Be sure that the
power outlet is located near the equipment so that it is
easily accessible.
Only use attachments/ accessories specified by the
11.
manufacturer.
Use only with the cart, stand, tripod, bracket,
12.
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
Unplug this apparatus when it will be unused for a long
13.
period of time.
Refer all servicing to qualified service personnel. Servicing
14.
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, or the
unit does not operate normally, or has been dropped.
uSE
ac power cord
Keep the following guidelines to protect the AC power cord from
being damaged. If the AC power cord is damaged, it may result
in a fire or an electric shock. Stop using it and ask your dealer or
ViewSonic service center to exchange it.
Do not place the TV where the power cord is subject to wear •
or abuse.
Do not pinch, bend, or twist the cord excessively.
•
The core lines may be bared and cut, causing a short-circuit, •
and resulting in a fire or an electric shock.
Do not convert or damage the power cord.
•
Avoid power cord being rolled over or rested •
upon.
When the power cord is plugged in, do not
•
move the TV.
Keep the power cord away from heat sources.
•
When you disconnect the AC power cord, disconnect it from •
the wall outlet first.
When disconnecting the power cord, grasp the plug instead of
•
pulling the power cord.
Use only an original ViewSonic AC power cord, not other
•
brands.
Do not use the supplied AC power cord on any other
•
equipment.
Wall outlet
Insert the plug fully into the outlet. If it is loose,
do not use it. Doing so may cause arcing and
result in a fire. Contact your electrician to change
the outlet.
Wiring
For your safety, be sure to unplug the AC power
cord when connecting cables.
Take care not to trip on the cables. It may cause damage to the
TV set.
Electric shock
Do not touch the AC power cord or the TV with a
wet hand. If you plug/unplug the AC power cord
from the TV with a wet hand, it may cause electric
shock.
Lightning storms
During a lightning storm, unplug the TV from the wall outlet and
disconnect the antenna to prevent damage to the TV.
When not in use
If you will not be using the TV set for long periods of time, the
TV set should be disconnected from the AC power outlet to
prevent power line surges. The TV set is not disconnected from
the AC power source when the TV set is switched off.
To disconnect the TV set completely, unplug from the AC power
outlet.
overloading
This TV set is designed to operate on a 120V AC supply only.