background image

v

ViewSonic

                                                                                                               VT2755LED

ENGLISH

If there are too many appliances connected to the 
same AC power outlet, it could result in a fire or 
an electric shock.

optional equipment

If optional equipment is to be installed, leave 
some space between optional equipment and 
the TV set. Picture distortion and/or noisy sound may occur if 
the TV set is positioned in close proximity to any equipment 
emitting electromagnetic radiation.

Small accessories

Keep small accessories in a safe place where children are unable 
to reach.

Magnetic influence

This TV contains a strong magnet in the speaker unit that 
generates a magnetic field. Keep any items susceptible to 
magnetic fields away from the speaker.

Sound

If you hear snapping or popping sound comes 
from the TV continuously or frequently while the 
TV is operating,  
unplug the TV and consult your dealer or service 
technician. It is normal for some TVs to make occasional 
snapping or popping sounds, particularly when being turned on 
or off.

use in outdoor

This TV is not designed for outdoors 
installation. Do not expose the TV to rain, 
as it may result in a fire or an electric shock. 
Also, do not expose the TV to direct sunlight, 
as it may heat up and become damaged.

Vehicle, ships and other vessels

Do not install this TV in a vehicle.  
Car accidents may cause the TV to fall down and 
cause injury.
Do not install this TV in a ship or vessel.
If the TV is exposed to seawater, it may cause a 
fire or damage the TV.

medical institutions

Do not place this TV in a place where medical equipment is in 
use. It may cause the medical equipment to malfunction.

Volume adjustment

Adjust the volume to avoid disturbing your neighbors.  

• 

Sound carries easily at night. Therefore, we suggest you close 
the windows or use headphones.
When using headphones, adjust the volume to appropriate 

• 

levels, or hearing damage may result.

aNtENNaS

outdoor antenna grounding

If an outdoor antenna is installed, follow the precautions below.
Do not install the outdoor antenna system near of overhead 
power lines or other electric light or power circuits, or where it 
can come in contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, 
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM 
CONTACTING SUCH POWER LINES OR CIRCUITS AS 
CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded so that it can provide 

some protection against voltage surges and built-up static 
charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A. 
and Section 54 of the Canadian Electrical Code in Canada 
provides information with in regard to proper grounding of the 
mast and supporting structure, grounding of the lead-in wire to 
an antenna discharge unit, size of grounding conductors, location 
of antenna discharge unit, connection to grounding electrodes, 
and requirements for the grounding electrode.

antenna grounding according to the National 
Electrical code, aNS/Nfpa 70

Antenna

Antenna discharge

unit

Grounding conductors

Power service grounding 

electrode system 

Ground clamps

Electric service 

equipment

Ground clamp

cLEaNING

cleaning the ac power plug

Unplug the AC power plug and clean it 
regularly. If the plug is covered with dust and 
gathers moisture, its insulation may deteriorate 
and result in a fire.

cleaning the screen surface/ cabinet of 

the tV set

When cleaning this TV, unplug the AC power 
cord. If not, it may result in electric shock. Use 
a dry soft cloth to clean the cabinet of the TV. To remove dust 
near the screen, wipe it gently with a soft cloth. Stubborn stains 
may be removed with a cloth slightly dampened with a solution 
of mild soap and warm water. Never use strong solvents such as 
thinner or benzine for cleaning. If using a chemically pretreated 
cloth, please follow the instruction provided on the package. The 
ventilation holes can accumulate dust over time.
To ensure proper ventilation, we recommend you to remove the 
dust periodically (once a month) using a vacuum cleaner, while 
the LED TV is powered off. 

Disclaimer

Some chemical cleaners have been reported to damage the 
screen and/or case of the LCD TV. ViewSonic will not be liable 
for damage resulting from use of these cleaners. 

carryING tHE tV

  

carry the tV as instructed

To prevent dropping the TV and causing serious injury, you must 
follow these guidelines:

Disconnect all cables before carrying the TV.

• 

Carrying the large size TV requires at least two or three 

• 

people.
When you carry the TV, place your hands as illustrated and 

• 

hold it securely. Do not put stress on the LCD panel and the 
frame around the screen.
When carrying the TV, do not subject it to shocks, vibration, 

• 

Содержание VS14569-1M




























































Отзывы: