34
•
If the RJ45 cables are not properly connected, the
Projector IP Address
,
Subnet Mask
,
Default Gateway
and
DNS Server
settings will display 0.0.0.0. Make
sure the cables are properly connected and perform the procedures above again.
•
If you need to connect to the projector in its standby mode, set
Standby LAN Control
to
On
in the
ADVANCED
>
LAN Control Settings
menu.
•
If you are in a non-DHCP environment:
1.
Repeat steps 1-2 above.
2.
Highlight
LAN Settings
and press
/
to select
Static IP
.
3.
Contact your ITS administrator for information on the
Projector IP Address
,
Subnet Mask
,
Default Gateway
,
DNS Server
settings.
4.
Press to select the item you want to modify and press
Enter
.
5.
Press
/
to move the cursor and the press
/
to enter the value.
6.
To save the settings, press
Enter
. If you do not want to save the settings, press
Exit
.
7.
Press
to highlight
Apply
and press
Enter
.
NOTE:
•
If the RJ45 cables are not properly connected, the
Projector IP Address
,
Subnet Mask
,
Default Gateway
,
DNS Server
settings will display 0.0.0.0. Make
sure the cables are properly connected and perform the procedures above again.
•
If you wish to connect to the projector in its standby mode, be sure you
have selected
Static IP
and obtained the
Projector IP Address
,
Subnet Mask
,
Default Gateway
and
DNS Server
information when the projector is on.
