32
Adjusting 4 corners
You can manually adjusts the shape and size of an image that is unevenly
rectangular on all sides.
1.
To display the Corner Adj. page, you can do
one of the followings:
• Press
.
•
Open the OSD menu and go to the
DISPLAY
>
Corner Adj.
menu and press
Enter
. The
Corner Adj.
page is displayed.
Indicates the corner you seleted.
2.
Use
/ / / to select the corner you
wish to adjust and press
Enter
.
3.
Use
/ to select an adjustment method that suits
your need and press
Enter
.
4.
As indicated on the screen ( / for a 45-degree
angle adjustment and / / / for a 90-degree
angle adjustment), press / / / to adjust its
shape and size. You can press
Menu
or
Exit
to go
back to a previous step. A long press for 2 seconds
on
Enter
will reset the settings on the corner that
you chose.
NOTE:
•
Adjusting keystone will reset the
Corner Adj.
settings.
•
After the
Corner Adj.
settings have been modified, some aspect ratios or timings
are not available. When that happens, reset the settings on all 4 corners.
Hiding the Image
In order to draw the audience’s full attention to the presenter, you can press
Blank
on the projector or remote control to hide the screen image. Press any key on the
projector or remote control to restore the image.
CAUTION:
Do not block the projection lens as this could cause the blocking object to
become heated and deformed or even cause a fire.