ViewSonic N4285p-4M, Руководство по обслуживанию

Страница: 25 / 109

To Restore Factory Setting
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Setup” menu.
3. Press ENTER
or ► to enter “Setup” menu.
4. Press ▲ or ▼ to select “Memory Recall”, then press
ENTER to restore the factory default setting.
Setting RS232 Parameter
1. Press the
MENU
button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Setup” menu.
3. Press
ENTER
or ► to enter “Setup” menu.
4. Press ▲ or ▼ to select “TV ID”, then press ◄ or ►
to set the TV ID number from 01~99. For detailed
information, refer to the RS232 Protocol on page 42~52.
Using VGA Function
1. When in VGA source, press the
MENU
button to
display the OSD main menu.
2. Press ▲ or ▼ to select the “Video” menu.
3. Press
ENTER
or ► to enter “Video” menu.
4. Press ▲ or ▼ to select your desired controls, and press
◄ or ► to adjust.
4. For advanced VGA functions, select “VGA” (only
enabled in VGA source) and press
ENTER
to enter
VGA setting.
5. Press ▲ or ▼ to select “H. Position”, “V. Position”,
“Phase”, or “Clock”, and adjust the level with ◄ or ►.
＊
When in VGA source, the Audio, and Setup menus
are the same as or similar to when in other source.
Instead that some controls are disabled.
＊
When there is no signal in the VGA mode, “No signal
” will be displayed on the screen,and the TV will
automatically turn into power-saving mode after a
few seconds’ idleness. Press
POWER
or
INPUT
on
the remote control, or press
POWER
on the TV panel
at any time and the TV will return to VGA mode.
ViewSonic Corporation
Confidential - Do Not Copy
N4285p-4M
22