background image

VIEWSAT 9000HD  User Troubleshooting Guide & Manual.

• is manual was constructed for the FATDOC growing population of  new VS9000HD users.
• Use the manual for a quick reference guide when things go wrong with your unit. Answers are listed below.
• Please read each section of this manual and familiarize yourself with key features for troubleshooting.

is manual was created for all VS9000HD owners of the world..... enjoy.

A paper life raft

Table of Content:

1.............  HOW TO CONNECT YOUR RECEIVER

2.............  8PSK CARD

3.............  SET-UP SYSTEM

4.............  MENU STRUCTURE

5.............  INSTALLING FIRMWARE / BIN FILES

6.............  SPDIF AUDIO

7.............  RECORD/PLAYBACK

8.............  CABLES

9.............  HOW TO RECOVER FROM BOOT-LOOP

10...........  COPY FILES TO FLASH DRIVES

11...........  SAVING CHANNELS/SATELLITE INFORMATION

12...........  SATELLITE DISHES AND LNBs

13...........  SWITCHES

14...........  ANTENNA SET-UP

15...........  CHANNEL SCAN

• 

16...........  TROUBLESHOOTING / QUICK TIPS

SAFTY PRECAUTIONS:

Do not block the receiver ventilation holes. Ensure that free airflow is maintained around the receiver. Never 
set the receiver on soft furnishings or carpets. Do not use or store the receiver where it is exposed to direct 
sunlight, or near heater. Never stack other electronic equipment on top of the receiver.  Place the receiver at 
least 30mm from the wall. 

CAUTION:

Changers or modifications not expressly approved by manufacture responsible for compliance could void the 
users authority to operate the equipment.  Main Software still resides in BETA.

Document page.1

VIEWSAT 9000HD User Troubleshooting Guide & Manual.    April /2008

Содержание VS9000HD




















Отзывы: