2.6 Install TF Card
2.7 Image Output Interface
TF (Micro SD card): Install the TF card to the card slot (Re. 2.1
Overview). Support max 128GB. Request Class 10 (10m/s)
transmission speed or higher and FAT32 or exFAT format.
HDMI: Micro HDMI output, HD 1080P 60/50/30/25fps, 1080P 60fps
as default. (Optional)
SDI: SMA outer screw inner hole interface, 1080P 30fps output.
(Optional)
AV: no AV output
Network: Ethernet output interface, support RTSP/RTMP/UDP/ON-
VIF video streaming. Default: RTSP output, IP address: RTSP:
//192.168.2.119:554, output resolution: 720P (record in 1080p),
frame rate: 25fps, bit rate: 2M. (Optional)
Make sure device is power off when inserting the TF
card, hot plugging is not supported.
Above output mode is optional, HDMI and SDI output
cannot coexist at the same time. Please subject to your
actual product.
When using user interface software Viewlink for network
connection, the network of external device (computer)
should be the IP address: 192.168.2.2 (choose the last
byte among 2~254, can not be 119 same as the gimbal),
subnet mask: 255.255.255.0, Default gateway:
12
