Connection Diagram(Standard Version)
MU
LTI
PIC/REC F
O
CU
S
ZOOM MODE Y
AW
PI
TCH
PWM IN
GND
5V OUTPUT
Remote Controller
Receiver
3.1 PWM Control
Control the gimbal camera functions by the multiplex pulse width
modulation signal outputted by PWM channel of the remote control
receiver. The camera needs up to 6 control channels of PWM (to
expand tracking function use up to 7 PWM channels). You can
choose needed functions according to actual usage to reduce the
required number of PWM channels.
3.1.1 PWM Connection Diagram
(Connect pitch chan-
nel as example)
3. Signal Control
192.168.2.1, and all firewalls of the computer must be
closed. Then enter the IP address of the gimbal camera,
Open Video, the video stream can be outputted.
13
