14
3.2.2. Power supply
Insert the power connector of the power adaptor into the charging port of the ground unit
and insert into the aerial plug into an electrical outlet to fully charge the battery of ground
unit. Power supply range is 7V~16V with recommended voltage of 12V.
Note:
(1)
Charging voltage is 12V.
(2)
To avoid equipment damage, install antennas before powering on the units.
3.2.3. Connection to ground control station
Insert the six-pin connector of supplied serial cable to the serial port of the ground unit and
connect the other end of supplied serial cable to the telemetry port of the ground control
station.
Note:
(1)
Ensure the baud rate is configurated correctly.
(2)
Ensure the interface sequence is connected correctly.