13
3.2. Ground Unit Installation
3.2.1. Antenna installation
Screw the ground unit antennas onto the RF ports. Make sure the antennas are tightly
installed.
Note:
(1)
To avoid equipment damage, install antennas before powering on the units.
(2)
Ensure the antenna connector is vertical to the module when it is screwed onto the RF
port. Screw the antenna tightly to avoid loose connection, but do not overtighten the
antenna to avoid damaging the antenna.
(3)
Both antennas need to be installed.
(4)
Adjust the antenna to be vertical to the ground during operation.