Viessmann Vitosol 200-FM SH2F Скачать руководство пользователя страница 44

Страница: 44 / 92

Solar System Design Guide

6020 457 - 01

Design Information

In sloped roof systems, the collectors and the roof frame

are connected. At each fixing point, a roof bracket and

rafter anchor penetrates the water-carrying level below

the collector. This requires a completely rain-proof and

secure anchorage. The fixing points and therefore also

any possible defects will no longer be visible post

installation. Maintain the minimum clearances from the

roof edge in accordance with local codes.

Collector Fixing

Due to the many varieties available, solar collectors can

be installed in almost all types of building, both in new

build and modernisation projects. As required, they can be

installed on pitched roofs, flat roofs and on walls, as well

as freestanding on the ground.

Viessmann offers universal fixing systems to simplify

installation. These fixing systems are suitable for virtually

any form of roof and roof cover as well as for installation

on flat roofs and walls. For more detail, refer to the

installation manual for the individual collector model.

Sloped Roof Installation

During installation of the collectors (freestanding or lying

flat), the minimum clearances from the edge of the roof in

accordance with the standard must be observed (see page

42). If the roof size necessitates a split array, ensure that

collector of the same size are created. The collectors can

be secured on any solid substructure or on concrete slabs.

Note

: When installing collectors on concrete slabs,

secure them with additional ballast to prevent against

slippage, tipping and lifting. Slippage is the movement

of the collectors on the roof surface due to wind,

because of insufficient friction between the roof

surface and the collector fixing system. Collectors can

be secured against tipping and lifting by using guy

ropes or by being fixed to other roof structures.

Flat Roof Installation

Wall Installation

This is a unique option for installing solar collectors as it

is possible to have the collectors mounted to the wall.

This installation option can be used to create an awning

system or to have the collector array become part of the

building architecture.

This mounting option has many benefits such as

increased installation angles (e.g. 60° - 80°) which can

reduce overheating during the summer. This mounting

option is also referred to as passive solar shading.

Passive solar shading is a good way of reducing solar

exposure in the summer months while increasing the solar

capturing potential during the winter heating season.

When mounting the collectors for passive solar shaded

installations, it is very important to accurately calculate

the distance between the upper and lower course of

collectors. If the vertical distance between the stacked

arrays is either to small or to great to could affect the

overall seasonal output of the solar system.

Legend

Summer Sun Angle

Spring/Fall Sun Angle

Winter Sun Angle

Содержание Vitosol 200-FM SH2F





























































































Результаты поиска

Содержание Vitosol 200-FM SH2F

Отзывы:

Похожие инструкции для Vitosol 200-FM SH2F

Бренды по названию

Популярные бренды

Viessmann Vitosol 200-FM SH2F, Руководство по конструкции

Результаты поиска

Содержание Vitosol 200-FM SH2F

Отзывы:

Похожие инструкции для Vitosol 200-FM SH2F

Бренды по названию

Популярные бренды