27
Required settings
The following settings are required for central heating:
■
Setting DHW temperature set value: See page 27.
■
Setting operating program: See page 27.
■
Setting time program: See page 27.
Setting the DHW temperature
Press the following buttons:
1.
ä
repeatedly until the "standard menu" is dis-
played.
2.
|
/
~
for
"DHW"
.
3.
d
to confirm.
4.
|
/
~
for
"Set temperature"
.
5.
d
to confirm.
6.
|
/
~
for the required temperature.
7.
d
to confirm.
"Adopted"
appears briefly in the dialogue
line of the display.
Operating program
Setting the operating program for DHW heating
Heating program
Select with
Standby mode
DHW
Fig. 23
Press the following buttons:
1.
ä
repeatedly until the "standard menu" is dis-
played.
2.
|
/
~
for
"DHW"
.
3.
d
to confirm.
4.
|
/
~
for
"Operating program"
.
5.
d
to confirm.
6.
|
/
~
for
"DHW"
or
"Standby mode"
.
7.
d
to confirm.
Time program
Setting the time program for DHW heating
The times at which DHW heating is enabled for the rel-
evant heating circuit depend on the switching time set-
tings for the respective day (4 possible time phases).
■
The time program for DHW heating is made up of
time phases. A time phase from 06:00 to 22:00 h
every day is set at the factory.
■
Automatic mode
is set at the factory for DHW heat-
ing.
■
If you do not want automatic mode, you can select
up to 4 individual time phases per day for DHW heat-
ing. For each time phase you set the start and end
points.
■
In the "Extended menu", you can check the current
time program under
"Information"
DHW heating
DHW temperature
5679252
Содержание VITOLIGNO 300-H Series
Страница 42: ...42 2 for Fault 3 d to confirm Checks Checking fault messages cont 5679252...
Страница 67: ...67 5679252...
