Viessmann Vitodens 200-W 19 WB2B Series, Руководство по установке

Страница: 41 / 64

Control Connections
41
Electrical Connections
(continued)
Connecting the Power/Pump module
(continued)
1.
Remove the cover of the power
pump module. Using the four screws
supplied, mount the module base on
the wall next to the Vitodens boiler.
2.
Secure the connecting cables to the
wall using the supplied conduit
holding clips.
It is essential to route cables as
illustrated to ensure freedom of
movement of control unit.
3.
Route the cables between the
control support console and control
unit.
4.
Secure cables behind the control
unit with cable ties.
Cables in the vicinity of the control
unit must not be secured to the
control unit bracket.
5
3
6
9
2
9
7
v
1
.6
Low voltage connections
230V connections
A
B
1.
4.
3.
2.
Fig. 35
Legend
B
A
IMPORTANT
When running and securing
connecting cables on site, ensure
that the maximum permissible
temperatures of the cables are not
exceeded.
CAUTION
IMPORTANT