Viessmann Vitocrossal 300 CU3A Скачать руководство пользователя страница 30

Страница: 30 / 116

Vitocrossal 300 CU3A 26 to 199 Service

5673 649 - 18

Check Gas Pipes and Fittings for Leaks

1. Remove the motorized lever from the mixing valve

handle.

2. Check the mixing valve for ease of operation.

3. Check the mixing valve for leaks. Replace the O-rings

if the mixing valve leaks.

4. Snap the motorized lever into place.

Service

Checking the Mixing Valve for Obstructions and Leaks

CAUTION

Ensure all joints of gas line are pressure tight and that

gas valves do not leak when under normal operating

pressure (use approved leak detection liquid).

WARNING

The gas supply piping must be leak tested before placing

the boiler in operation.

WARNING

Escaping gas leads to a risk of explosion.

Check gas equipment for tightness.

Note:

For the tightness test, use only suitable and

approved leak detecting agents and devices.

Leak detecting agents with unsuitable contents

(e.g. nitrites, sulphides) can lead to material

damage. Remove residues of the leak detecting

agent after testing.

Check Electrical Connections

Ensure all plug-in connectors and strain reliefs make

positive contact and are seated properly.

Refer to the Installation Instructions

Содержание Vitocrossal 300 CU3A





















































































































Результаты поиска

Содержание Vitocrossal 300 CU3A

Отзывы:

Viessmann Vitocrossal 300 CU3A, Инструкция по эксплуатации, Страница: 30 / 116

Результаты поиска

Содержание Vitocrossal 300 CU3A

Отзывы: