background image

23

Further information can be found in chapter
"Terminology" in the Appendix.

Information on prepaid SIM cards

Prepaid SIM cards may lose their validity after a cer-
tain time, subject to the available credit and the mobile
phone provider. After expiry of this period you can only
use this SIM card again if it has been enabled by the
mobile phone provider, e.g. when more credit has
been added.

Information on contract SIM cards

The validity of contract SIM cards expires at the end of
the contract.
If the mobile phone contract is to be terminated, this
function can be used as a reminder of the expiry date.

!

Please note

An invalid SIM card will cause the remote moni-
toring of the heating system and the function of
any additional connected components to cease.
If you specify the end of the validity period with
"enddat", then the Vitocom 100 will send 3 SMS
alerts at set intervals in good time prior to expiry.

Entering the SIM card end date 

To monitor the validity period, enter the expiry date into
the Vitocom 100. Subject to the current date 

"aktdat"

also being correct, the Vitocom will send an SMS alert
60, 30 and 10 days prior to the expiry date.

The date can be specified in the following formats:

D.M.YY or D.M.YYYY

DD.MM.YYYY or DD.MM.YY

Example:

SMS from the user

1111

þ

enddat

þ

10.02.2015

Reply SMS from the Vitocom 100

1111 ENDDAT 10.02.2015 OK

SIM card runtime

Prior to expiry of the validity period, the Vitocom 100
sends an SMS alert to both mobile phone numbers
"mobnr1" and "mobnr2" (if entered). This message is
sent at the following remaining validity:

60 days left

30 days left

10 days left

Example:

SMS alert

1111 Runtime only 30 days left

Note

If an information text ("info") has been specified, that
text will be displayed in the SMS alert after the access
code.

Example:

SMS alert with information text

1111 Heating system xyz only 30 days left

Entering the SIM card credit (prepaid)

Further information can be found in chapter
"Terminology" in the Appendix.

Enter the amount that has been put onto the SIM card.

Specify as number with decimal places, without
units.

Enter a comma or full stop as a separator.

Example:

Entering a SIM card credit of €25.00 (prepaid).

SMS from the user

1111

þ

vwert

þ

25.00

Reply SMS from the Vitocom 100

1111 VWERT 25.00 OK

Entering the cost per SMS (prepaid)

For checking the credit on a prepaid SIM card.

Credit monitoring

Validity of SIM card

5782 277 GB

 

Содержание Vitocom 100

































Отзывы: