Viessmann BW 301.C090, Инструкции по установке и обслуживанию для подрядчиков

Страница: 9 / 92

9
The range of functions can be extended with additional
components and accessories.
Intended use presupposes that a fixed installation in
conjunction with permissible, system-specific compo-
nents has been carried out.
Commercial or industrial usage for a purpose other
than central heating/cooling or DHW heating shall be
deemed inappropriate.
Incorrect use and/or operation of the appliance (e.g.
the appliance being opened by the system user) is pro-
hibited and will result in an exclusion of liability. Incor-
rect use also occurs if the components in the heating
system are modified from their intended function. Note
The Vitocal 300-G Pro must be operated exclusively
by authorised and trained personnel.
Product information
Vitocal 300-G Pro
Heat pump Vitocal 300-G Pro, type BW
Medium Brine/water
Single stage heat pumps 301.C090
301.C120
Two-stage heat pumps 302.C090
302.C110
302.C140
302.C180
302.C230
Characteristics:
■ Integral heat pump control unit Vitotronic 200,
type WO1C
■ The refrigerant circuit has an electronic expansion
valve (EEV) with an independent control circuit
(refrigerant circuit controller).
■ The heat pump control unit can switch and regulate
one cooling circuit. The cooling circuit may be a
heating circuit prepared on site for cooling operation
or a separate cooling circuit.
■ All sensors are fitted inside sensor wells.
■ Electric booster heaters (on site) can be controlled
(e.g. instantaneous heating water heater, immersion
heater in heating water buffer cylinder).
An output increase in connection with additional
Vitocal 300-G Pro appliances (cascade) is possible.
Information
Intended use
(cont.)
5787 232 GB
Information