U S E R ‘ S M A N U A L |
V I S L I D E | 9
Do not step on the spiral cable.
Never touch the connection cables with wet hands.
Remove connection cables by pulling on the terminations and not the cable, as this
could result in damage.
Do not situate the control tower near sources of heat for prolonged periods of time
(heaters, hot are circuits…) and maintain ventilation displays unobstructed.
Do not place the
Vislide
in a humid environment. Do not allow liquid to enter the
equipment, especially the control tower. Keep the machine away from heat sources.
Viequipment
is not responsible for damage caused by the lack or interruption of
grounding cable (ie. Electrical discharge).
Before beginning any exercise, ensure that the control tower is sufficiently remo-
ved from the sliding platform to avoid any safety risk.
The vibratory platform has sliding properties. Be especially careful when stepping
upon the platform, always ensuring slide board booties are in good repair.
Be sure to use adequate snap rings when using external resistance systems (elastic
straps and/or pulley devices) in conjunction with the platform anchors.
