U S E R ‘ S M A N U A L |
V I S L I D E | 10
Once finished training, stop the device using the principal switch, situated at the
bottom of the tower. Disconnect the control tower when not in use for prolonged
periods of time.
To store and move the
Vislide
, use the principal off switch and disconnect the
control tower safety connector.
C O N N E C T I O N O F T H E S L I D I N G P L A T F O R M T O
T H E C O N T R O L T O W E R
First use. Once removed from the packaging, place the control tower near the sli-
ding platform so that the spiral cable is positioned near the connector. Connect the
spiral cable safety connector to the electronic control tower as shown in
Figure 3
.
Plug the power cable in to the power socket and turn on the principal switch.
If the display does not come on, ensure that the L-shaped connector is properly
inserted and that the power plug functions correctly.
