U S E R ‘ S M A N U A L |
V I S L I D E | 18
When using the central dial on the lower part of the control tower to select an on/
off cycle, the vibration time interval cannot be modified. In the case that one may
wish to change the vibration time interval or return to a fixed vibration frequency,
the central dial must be turned to the left until it reaches its limit.
S T A R T I N G T H E S L I D I N G P L A T F O R M
To start the vibratory bar, click on the green START button, situated at the top left
side of the control tower.
(Figure 7)
. The sliding platform should immediately start
up. If this is not the case, check that all connections are correct (see “connecting the
sliding platform to the control tower”).
To stop the sliding platform, click on the red STOP button, situated at the top right
hand side of the control tower
(Figure 7)
.
